Mastering the Basics: A Beginner’s Guide to Install Electric Shower

Install electric shower, can be a rewarding DIY project for beginners, but it’s crucial to follow safety guidelines and manufacturer instructions carefully. Here’s a step-by-step guide to help you master the basics of installing an electric shower:

Before You Begin:

  1. Check Local Regulations: Ensure you’re allowed to install an electric shower in your area and that you comply with any relevant regulations or building codes.
  2. Select the Right Shower: Choose a shower unit that is suitable for your electrical system and water pressure. Check the manufacturer’s instructions for compatibility with your home’s wiring and plumbing.
  3. Gather Tools and Materials: You’ll need basic tools such as a screwdriver, wrench, drill, spirit level, and pipe cutter, as well as electrical tools like wire cutters and strippers. Additionally, you’ll need plumbing materials like pipes, fittings, and sealant.
  4. Turn Off Power and Water: Before starting any work, switch off the electricity supply at the circuit breaker and shut off the water supply to the bathroom.

Install Electric Shower Steps:

  1. Positioning the Shower Unit:
    • Choose a suitable location for the shower unit, ensuring it’s close to both the electrical supply and the water supply.
    • Use a spirit level to ensure the unit will be installed horizontally.
  2. Mounting the Unit:
    • Follow the manufacturer’s instructions to securely mount the shower unit to the wall. Use appropriate screws and anchors if necessary.
  3. Connecting Water Supply:
    • Connect the cold water supply pipe to the inlet of the shower unit. Use appropriate fittings and ensure the connections are watertight.
    • If needed, install a pressure-reducing valve to regulate water pressure.
  4. Electrical Connections:
    • Consult a qualified electrician if you’re not experienced with electrical work. The electrician should connect the shower unit to the electrical supply according to the manufacturer’s instructions.
    • Ensure all connections are properly insulated and protected from water.
  5. Testing:
    • Before sealing any fittings or turning on the power, conduct a thorough test of the installation.
    • Check for leaks in the water supply connections.
    • Test the electrical connections to ensure they are secure and functioning properly.
  6. Sealing and Finishing:
    • Once the installation has been tested and verified, seal around the edges of the shower unit with silicone sealant to prevent water ingress.
    • Clean up any debris or excess sealant to finish the installation neatly.
  7. Final Checks:
    • Double-check all connections, seals, and fittings to ensure everything is secure.
    • Turn on the water supply and check for leaks.
    • Switch on the electricity supply and test the shower for proper functionality.

Safety Tips:

  • Always follow manufacturer instructions and local regulations.
  • If you’re unsure about any aspect of the installation, seek professional assistance.
  • Turn off power and water before starting work.
  • Use appropriate safety gear, such as gloves and safety glasses.
  • Test the installation thoroughly before use.

By following these steps and safety guidelines, you can successfully install electric shower as a beginner. If you encounter any difficulties or uncertainties during the process, don’t hesitate to seek guidance from professionals.

Electric Shower Installation Dublin
403a South Circular Road
Eircode D08 A8F2
Ph: 085 1050 996

Check out our website: